USER MANUAL
9
Refer to the pic 1~3, loose and take off the 4 screw and the upper clamp,
Install the handle in to the middle clamp, then locked the screw
.
INSTALLING PLASTIC GUARD
1, Move the 2 screw from the guard
2, Aim at the thread hole with the clamp and guard
3, Tighten the screw
Screw
Clamp
Guard
.
INSTALLING HARNESS
1, Adjust the harness hanger in a comfortable piston.
2, Buckle the harness at the hanger
.
REPLACE THE METAL BLADE TO STRING HEAD
.
DISASSEMBLY METAL BLADE
1, Align the hole on the gear box to the slot on the flange washer
2, Use pin to through the hole and slot and hold the flange washer
3, loose the nut and remove the metal blade and cup washer
.
ASSEMBLY STRING HEAD
4, Install the flange washer and cup washer on the spline shaft.
5, Align the hole on the gear box to the slot on the flange washer.
6, Use pin to through the hole and slot and hold the flange washer.
7, Install the string head and tighten it.
