8
Password
Notice:
To access the Programming Menu, the Password is
101010
.
Step 1: Power Up – You should now be on the Status Screen.
Step 2: Press F3 to go back.
Step 3: Now enter the password. (All digits are set at 000000 at this point.)
Press
to get the digit to be # one
Press
2 times (The third digit should be highlighted.)
Press
to get the digit to be # one
Press
2 times (The fifth digit should be highlighted.)
Press
to get the digit to be # one
Press F4 (enter)
Note:
If the wrong password was entered, press
F1 (ALL0)
to set all the digits to
the number 0 and you can begin re-entering the password from the beginning.
Pressing
F2 (RST0)
will set the individual digit that is highlighted back to the
number 0.
Note:
For security reasons, each digit will always be displayed as an asterisk.
