Hardware Pack 2
Part Description
Quantity
Image
BB
M6 Flat washer
16P CS
EE
M6X35 Bolt
8 PCS
FF M6
Nut 8
PCS
Fig.5: Insert the slanting beam (F) into the lower tube (G).
Fig.6: Insert the top end of the slanting beam into the top connector (I), then assemble the hook (K) on the
top connector.
Fig.6-1: Secure the assembled the slanting beam to the post by using flat washers (BB) and nuts (FF).
Fig.8: Secure the middle beam (D) to the connector (E) by using bolts (EE), flat washers (BB) and nuts (FF).
Fig.9: Insert the small slanting beam (H) into the small connector (J).
fig.7: Insert the middle beam (D) into the top connector (I)
