Romus 94668, User Manual

Page: 24 / 53

Transport
Disconnect the machine from any power socket to which it is connected before carrying out the
removal operation
Remove the blade before transporting
To dismantle the Romus stripper:
Disconnect the machine from any power socket to which it is connected
Remove the weights (see
Fitting weights on page 11 )
Remove the blade (see Changing the blade page 9)
Unplug the connectors at the bottom of the handle
Remove the front pins starting from the highest one
Remove the rear pins
To assemble the Romus stripper:
Ensure the mains plug is not plugged in to a mains socket.
Ensure no blade is fitted
Position the handle and install the rear pins starting with the top one
Position the front section and install the front pins starting with the bottom one
Insert the connectors at the bottom of the handle
Position the wire to the front motor in the red securing lug