Place a suitable accessory in the projector e.g. Wireless Wheel Rotator (22614 Magnetic) with an
Effect Wheel. Slide the Wireless Wheel Rotator into the rear gate runners (the main effect goes
into the rear gate runners, with Distortion Wheels etc. in the front gate runners). Once the
Wireless Wheel Rotator is in place, operation will begin instantly.
Plug the round tip of the 12V transformer into the 12V socket on the rear panel. Plug the
12V transformer into a mains socket and switch on at the wall.
Then turn the projector on by the mains switch to the “I” (ON) position. “O” is the OFF position.
Focus the projected image by twisting the lens in and out until the desired focus is achieved.
During focusing beware of rotating the projection lens too far out as this can cause the lens
to separate from the projector and may drop and break or cause injury.
