12. Technical Specification
Size:
21.5L x 12.5W x 8cmH (27cmH with bracket)
Power Consumption: 24 Watts maximum
Voltage:
100 – 240V adapter (1.5m lead)
Output:
12V ~ output current: 750mA maximum
Light:
20W LED Module
Average LED Module life 100,000+ hours
Weight:
Projector 1.67kg, projector and transformer 1.85kg, packed: 2.4kg
Lumens:
1200 lumens from LED; 475 lumens (on screen at approx.. 2.8m) with
new module
Colour :
Colour temperature 4000° K
Standard lens:
3 element 85mm f2.8 42.5mm Helical Focus Groove
Operating:
Ambient temperature 10 to 35°C
Relative humidity 80%rH max.
13. Installation
Choose a suitable location for the projector, bearing in mind the following:
Please seek advice from a suitably qualified electrician regarding the safe installation
of this projector. Installation requirements will very according to the zones of the
water environment - please refer to the BS 7671: 2008+A3:2015 Requirements for
Electrical Installations 17th Edition regulations (particularly point 702.55). It may be
advisable to install this in a neighbouring room and project through a Perspex screen.
Install indoors in dry environments only.
This product requires one electrical socket.
Make sure the projection will be onto a suitable surface – a surface free of objects
and that is white or pale in colour.
The projector is a visual product and should not be handled. However, you may wish
to access the projector periodically to change effects.
There must be unrestricted airflow around the projector, especially around the air
inlet grille.
If an extension cord is necessary, a cord with a current rating at least equal to that of
the appliance must be used. Cords rated for less amperage than the appliance may
overheat.
The projector must always be connected to a grounded (earthed) electricity supply.
Only connect to a power supply with a voltage corresponding to that printed on the
projector. Use the adapter fitting that is appropriate to the country where the
projector is being used.
Do not use the projector at an angle of more than 90° from horizontal as this may
cause an effect or effect accessory to separate from the projector, fall and break
which may also cause injury.
