13.
Installation
1.
Allow plenty of unobstructed space around the swing. Suspended equipment needs
a minimum ceiling height of 2.5m (8 feet). Suspended equipment should be
positioned a clear distance of 1.8m (6 feet) from walls and obstacles.
2.
This swing should be suspended from one suspension point.
3.
Use a Safety Rotational Device to suspend this product from
your suspension system.
Our safety snaps can be locked. Turn the locking nut to open the
snap (to slide this nut down to allow the snap to
be opened). Turn the nut in the opposite
direction to slide it up and over the opening to
lock it.
14.
Care and Maintenance
1.
All the parts of this swing should be checked on a regular basis (we recommend checks
before each use, but check at least monthly - more if the swing is used often). Use a
maintenance sheet (such as the example one provided) to record these checks.
2.
Check the following for signs of wear and tear and repair/replace as appropriate:
wear of safety snap and eye bolt on Safety Rotational Device
fraying ropes - check the end of rope under black cover
wear on the Safety Snap
signs of wear and tear on your suspension system - replace as appropriate
cracks or splinters on the bar. If cracks are found discontinue use. Splinters
should be sanded smooth.
If the Safety Rotational Device does not spin smoothly or makes a noise,
discontinue use.
3.
Store indoors in a safe place out of direct sunlight when not in use.
4.
Wipe clean with a slightly damp cloth and a very mild cleaning solution. Allow to dry
before use. Do not immerse in water.
15.
Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
BOLSTER SWING 21560, January 2020
Copyright ROMPA® Ltd
