Page
9
of
18
Copyright ROMPA® Ltd
INFINITY & BEYOND 20565, KH 4.11
SAFETY
Always supervise the use of this product.
For indoor use only.
In the unlikely event of product failure this panel will automatically shut down. Please seek
advice – only a suitably qualified person should attempt repair.
CARE & MAINTENANCE
Since this product uses LEDs not lamps, and LEDs last several thousand hours, it is
extremely unlikely that the LEDs will need replacing.
Once this product is eventually exhausted, please dispose of it appropriately.
TROUBLESHOOTING
In the unlikely event of product failure, please check the following:
•
Has the product been plugged in and switched on at the wall?
•
Check the fuse in plug
•
If the front cover has been removed, it is possible that removal has dislodged the small
black box that is connected to both the jack socket (visible from the front) and the back
of the front cover. Attached to this small black box is a plug from the transformer – this
plugs into the small black box. Check that this has become detached. Check all
connections are properly connected.
SPECIFICATION
Power Supply: 230V 50 Hz
(110/120V for US) 60 Hz
Output: 12V DC 5A
5A fuse in mains plug (UK)
LEDs: 64 x multi-colour, high brightness (-90mcd) 10mm diameter, 50 degree viewing angle
The panel cover is phthalate-free