Page
6
of
18
Copyright ROMPA® Ltd
INFINITY & BEYOND 20565, KH 4.11
Sound Effects (yellow button with musical notes)
Press this button to activate a sound effect at any time. There are
4 sounds which play in the same order. Use the Volume button at
the top of the panel to adjust the volume.
When the panel is switched off after use, the panel; will ‘remember’ the last volume setting
chosen. The Volume button can be either pressed repeatedly or held down to adjust the
volume setting.
The above controls have a round socket above them for the Removable Control Box with Panel 20565.
Modes
Mode 1: The first pattern is repeated continuously till the Pattern button is pressed, or until the
connected switch box top is pressed. The Stop/Start button can be used in this mode.
Mode 2: Automatic pattern change. The pattern changes when the Red button with the swirl
is pressed, or after several cycles. How quickly the several cycles is completed depends on
the speed chosen with the Speed Button. The Stop/Start button can be used in this mode.
Mode 3: Infinity & Beyond will light up the next LED with every touch of the Stop/Start button
(or an external switch connected via jack socket). That is to say that where as Modes 1 and 2
move between effects, Mode 2 remains on the same effect, but moves the LEDs along in
sequence.
To change between modes:
The panel starts up in whichever mode it has been set to.
To choose Mode 2, press the top rocker switch at the top of the panel till it is in the central
position.
To choose Mode 3, press top rocker switch till it is on Mode 3.
Switch off after use.