Page
5
of
18
Copyright ROMPA® Ltd
INFINITY & BEYOND 20565, KH 4.11
36. The LEDs outlining the joined circles are illuminated. The overlap of the circles is not
illuminated. The LEDs are green – the colours rotate in a sequence: 2 LEDs ON, 2 LEDs
OFF.
37. The LEDs outlining the joined circles are illuminated. The overlap of the circles is not
illuminated. The LEDs are multi-coloured and rotating in sequence.
38. As 35., but in an anti-clockwise direction.
39. One red LED moves around the outline of both circles, in an anti-clockwise direction.
40. As 39, but green.
41. As 39, but blue.
42. Starting in the bottom circle, the number of illuminated LEDs increases by one. Once the
full figure of eight is illuminated, the number of LEDs decreases by one. The display is
red, and moves in an anti-clockwise direction.
43. As 42., but the display is green.
44. The display is red, with 4 green LEDs in each circle, rotating anti-clockwise in sequence.
45. The display is green, with 4 red LEDs in each circle, rotating anti-clockwise in sequence.
46. The outline of the 2 circles is purple, with green LEDs in the central oval where the two
circles overlap. Within this central oval, two red dots rotate in sequence.
47. The outline of the 2 circles is green, with blue LEDs in the central oval where the two
circles overlap. Within this central oval, two red dots rotate in sequence.
48. The outline of the 2 circles is green, with blue LEDs in the central oval where the two
circles overlap. Within this central oval, four red dots rotate in sequence.
49. All the LEDs are illuminated in a single colour, with the pattern rotating. After
approximately 6 seconds, the colour changes. The colour sequence is typically red,
green, blue, yellow, purple, white (light blue), turquoise, orange and back to red.
In Mode 2, press the round button at the top of the panel to stop and start one of the 49 LED
effects. Alternatively connect a switch via the jack socket in the bottom of the panel. Activate
the switch to stop and start the chosen LED effect.
Speed Button (green button with lightning flash)
There are 12 speed options available. Each touch of this button will
make the LED effects move more quickly. After the twelfth option,
the speed options will start again at the slowest option.
Stop/Start button (blue button with 2 vertical lines)
Use this pattern to stop and start the rotation of the LED effect.