Page
5
of
10
Copyright ROMPA® Ltd
WATER MATTRESS MASSAGE SYSTEM 20439, KH 4.11
•
Pressing M again (second time) – Wave massage program no. 2 is active
•
Pressing M again (third time) – Wave massage program no. 3 is active
•
Pressing M again (fourth time) – Wave massage program no. 4 is active
•
Pressing M again (fifth time) – Wave massage program no. 5 is active
•
Pressing M again (sixth time) – massage with individual settings
P Pulse Massage
With this button you can step through the pulse massage programs. You can choose between
two different pulse massage programs.
M+ Intensity of the Massage Programs
By pressing button M+ several times you can adjust the massage strength of the wave
massage program in five steps.
A1 – A6 Buttons for the Automatic Programs
Please note
: The automatic programs run for approximately 15 minutes
A1
Sleep
program1
A2
Sleep program 2 – soft massage to encourage sleep
A3
Refresh program 1
A4
Refresh program 2 – massage with medium intensity to refresh after a long day
A5
Fitness program 1
A6
Refresh program 2 – a very intensive massage
Example of use
•
Press button T to start the massage. The massage starts with individual settings.
•
Press the button of the desired auto program A1 – A6
SAFETY
Always supervise the use of this product.
Use only the AC/DC adapter supplied.
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving them
further your comments will be greatly received – please contact us at
