Page
4
of
10
Copyright ROMPA® Ltd
WATER MATTRESS MASSAGE SYSTEM 20439, KH 4.11
Please note
: if the massage motors 1-3 have been turned off before, the motors will start with
the default values (level 1).
Press this button again, the massage timer is set to 30 minutes (the Status LED will be red).
Press this button a third time to turn the massage OFF. You can also stop the massage
function by pressing button T continuously for 2 seconds.
Individual Settings
M1 Button for setting the intensity of the massage area M1
:
By pressing button M1 several times you can set the desired massage intensity in five levels,
starting with low (level 1) up to high (level 5).
If you press button M1 for a sixth time, the massage motors are turned off.
If you press button M1 again, the massage motors start again at level 1.
By pressing button M1 continuously for 2 seconds, the massage motors will be switched OFF.
LED 1 illuminates when the massage motors are working.
M2 Button for setting the intensity of the massage area M2
:
Follow the instructions for massage area M1.
LED 2 illuminates when the massage motors are working.
M3 Button for setting the intensity of the massage area M3
:
Follow the instructions for massage area M1.
LED 3 illuminates when the massage motors are working.
M4 Button for setting the intensity of the massage area M4
:
Follow the instructions for massage area M1.
LED 4 illuminates when the massage motors are working.
Massage Programs
M Wave Massage
With this button you can step through the wave massage programs. You can choose between
five different wave massage programs.
Example of use
•
Press button T to start the massage. The massage starts with individual settings.
•
Pressing M one time – Wave massage program no. 1 is active
