Do not attempt to use the battery charger as a power supply
Do not attempt to run the Portable Midi Bubble Tube whilst it is charging
Once the charging time is complete, remove the charger and store in a safe place.
Make sure the bubble tube is working before filling it with water.
Fill the bubble tube with clean water and BCB Water Treatment Fluid to within
approximately 25mm (1”) from the top of the column. Do not over-fill the tube. Make
sure that the jug or bucket you are using to fill the tube is also clean. Take care not to spill
the water. It is advisable to wrap a towel around the top of the base to catch any
accidental spillages.
Remove the protective film from the outside of the bubble tube column and dispose of
this appropriately. Plastic wrap can pose a suffocation risk to children and vulnerable
adults so keep it out of reach and dispose of it responsibly.
Put bubble tube cap on the top of the tube.
Switch the ON/OFF rocker switch to ON.
Press the START button firmly.
Adjust the speed of operation by using the SPEED dial on the left hand side of the control
panel. Scroll up for faster speed and down for less speed.
If desired, connect a Super Interactive Switch Box 17274 to the RJ45 socket. The
protective socket cover will have to be removed first and stored in a safe place.
Using a Super Interactive Switch Box 17274
