27
• The appliance activates the pump and extracts air from the vacuum chamber thus developing a
vacuum. The pilot lamp below the button “Automatik / Stopp“ lights up.
• After successful extraction of air, the pump stops and the sealing of the foil starts. Now the pilot
lamp below the button “Versiegeln” lights up additionally.
• As soon as this pilot lamp goes out, the process is completed.
• The appliance switches to operation mode. The first pilot lamp of the status display as well as the
upper resp. lower pilot lamp of the buttons “Lebensmittel“ and “Pumpleistung” – according to the
setting - light up.
• In order to remove the foil, fold the handle upwards and then open the upper part up to the stop.
• Check the sealing seam. A correct seam should be a smooth straight line without wrinkles and
showing no structure anymore.
• Pull the mains plug after each use and bring the upper part of the appliance into parking position.
Note: You can see the progress of the function in the status display.
D.) Vacuuming of food in containers
ATTENTION: Only use special vacuuming containers.
Please also pay attention to the safety notes which are enclosed
with the containers!
1.) Preparing the appliance for operation
• Completely unwind the power cord from the cord storage.
• Insert the plug into a socket. All pilot lamps light up for a short time.
• The appliance is in standby mode. The pilot lamps above or below the buttons “Lebensmittel“ and
“Pumpleistung” light up.
• Close the upper part of the appliance.
• For locking the upper part, fold the handle down (position “down“). As soon as the handle is in
the correct position, the first pilot lamp of the status display lights up. The appliance is ready for
operation now.
• Firmly insert one adapter port of the vacuuming hose
to the opening for container vacuuming until the
stop.
• Firmly insert the other adapter port to the opening of
the container lid.
Pay attention to the proper fit of the vacuuming hose
at both ports!
