13
Attention hazard of injuries: Do not touch the blade! Always handle the cutting tools
with care to avoid injuries!
Only disassemble the appliance at stillstand!
• Switch off the appliance – pull the mains plug!
• Do not press the ON button accidentally!
• Remove the base unit from the working cover of the glass bowl.
• Take off the working cover from the glass bowl.
• Take out blade or whisking disc. Hereto grasp blade or whisking disc at the shaft and remove
it upwards from the glass bowl.
Attention hazard of injuries: Do not touch the blade! The blade is very sharp;
handle it with care to avoid injuries! Only assemble the appliance at stillstand!
• Switch off the appliance – pull the mains plug!
• Do not press the ON button accidentally!
• Place glass bowl on the anti-slip mat.
• Insert blade respectively whisking disc carefully. Hereto grasp the blade or whisking disc at
the shaft and attach it to the axle inside the glass bowl.
• Put the working cover on the glass bowl. Please take care that the lid is positioned correctly.
• Afterwards place the base unit on the working cover. Please take care that the base unit is
positioned correctly.
The appliance is constructed for a maximal continuous operation of 15 seconds
(with blade) respectively 60 seconds (with whisking disc). When this time is reached,
the appliance has to cool down for at least 2 minutes.
If this is not observed, the motor might be damaged!
Attention hazard of injuries: The universal chopper has a delayed motor stop -
therefore do not disassemble the appliance before it has stopped!
Attention hazard of injuries: Do not touch the running blade – neither stir in the glass
bowl with a spoon or other objects!
How to disassemble your appliance
How to assemble your appliance
Operating the appliance
