18
• Attach and lock the top cover.
Take the top cover and place it on the juice container. The filling hole must be centrally above the grater. Fold the
two locking clamps up and hook the clamps into the intended bulges of the top cover. Now, push the locking
clamps inwards until they engage. Check the firm locking of the clamps! Insert the pusher into the filling hole.
• Attach the pulp container.
Take the pulp container at the recessed grip and position it slightly aslant below the top cover. Then tilt the
container to the back and push it downwards until it engages in the base lock.
• Assemble the juice jug.
Take the foam separator and insert it in front of the two bars and push it downwards as far as it will go.
Then attach the top cover.
ATTENTION: Hazard of injury! Never reach into the filling hole or
the grater! The grater is very sharp; handle it with care to avoid
getting hurt!
Operating the appliance
NOTE: The appliance is designed for a maximum continuous operation time of 30 minutes. If this time has been
reached, the appliance has to cool down for at least 10 minutes. If this is not observed, the motor might be
damaged!
• The juicer is not qualified for chopping and grating coffee beans, nuts, nutmegs, cereals, meat etc. as well as
for puréeing soup.
• Clean the grater and the filter regularly so that the micro-mesh filter does not congest.
• Empty the pulp container regularly.
• We recommend coating the pulp container with a suitable plastic bag where the pulp is collected. This will make
the cleaning easier.
Preparing the appliance for use
• Assemble the appliance.
Make sure the juicer has been correctly and properly assembled and that the grater does not show any damage
(see point “How to assemble your appliance”).
• Place the provided juice jug or any other suitable vessel below the spout.
Switching on or off
• Turn rotary knob to “OFF“ position and plug in the appliance.
The display will show:
NOTE: If no further setting is made within 5 minutes, the display will switch off. The appliance is in standby
mode now.
• Switch the appliance on.
For starting the appliance, turn the rotary knob clockwise to the desired speed level. The speed is classified in
5 levels, displayed as follows:
Summary of Contents for ES 850/E
Page 22: ...22 Notizen Notes...
Page 23: ...23 Notizen Notes...
