28
Assembling / disassembling of the chamber for grinder
Disassembling of the chamber for conical burr grinder
• Disconnect the mains plug from the socket.
• Disassemble the beans container.
(See page 27 “Assembling / disassembling the beans container“).
• Fold up the small metal bracket on the chamber for conical burr grinder.
• Turn the chamber for conical burr grinder counter-clockwise until it rests easily on the grinder.
• Remove the chamber for conical burr grinder upwards out of the conical burr grinder.
Assembling of the chamber for conical burr grinder
• Disconnect the mains plug from the socket.
• Hold the chamber for conical burr grinder at the metal bracket and insert it with slightly inclined bracket
into the conical burr grinder, if necessary find the correct position by gently moving it back and forth.
• Turn the chamber for the conical burr grinder clockwise with the bracket, until it will engage.
• Fold the metal bracket down.
• Refit beans container.