FIGURE 2
STEP 2
(Two adults are required to complete this step)
Turn the bed with the side with no drawers on the floor, taking care not
to scratch its finish.
Attach the oblique legs
to the bed using ten medium Allen bolts
(OL)
(3)
(2)
, two smaller Allen bolts
and the Allen key. Take care to insert the
smaller Allen bolts
in the straight corners of the metallic triangles
(2)
from the headboard side!
Completely tighten
10
(3)
both
all
medium Allen bolts
and
smaller
Allen bolts
used before.
(2)
Insert the straight legs
into the metallic inserts found in the middle
(SL)
beam of the bed. The straight legs of the bed are a little shorter than the
oblique ones so you can adjust their vertical position by screwing or un-
screwing them.
Turn the bed in its normal position, taking care not to scratch its finish.
Completely tighten
4
(4)
all
bigger Allen bolts
used to attach the
headboard.
REMINDER
You have to completely tighten
Allen bolts distributed as following:
16
-
bigger bolts
in the headboard;
4
(4)
-
medium bolts
in the oblique legs;
10
(3)
-
smaller bolts
in the backside oblique legs.
2
(2)
REQUIRED
WARNING!
COMPLETELY TIGHTEN!
SL
OL
SL
OL
OL
OL
3
2
3
3
3
2
3
3
3
3
3
3
3
x 10
2
x 2
