Step 1 - Checking and Sealing the Tray
1. Check the tray is level, on all sides (the bubble should be in the centre of the two lines on the spirit level).
2. Stand in the tray and check for no adverse movement.
3. The walls should be tiled and grouted up to the tray.
4. The tiles and the tray should be sealed, using a good quality bathroom sealant.
•
Spray the seal and joints with the shower head and check for leaks when the silicon has cured.
•
Check the plumbing for leaks.
•
Do not plasterboard over the tray.
•
Do not grout the tiles when the enclosure has been fitted as the grout may discolour the aluminium
profiles.
• Make sure the tray is installed as per manufacturer’s instructions.
• When all of the above has been completed please proceed to Step 2
..
ET Sliding Door:CSP 4/5/10 11:33 Page 3
