Brake Release / Freewheel Operation (Fig. 7 & 8)
The brake release lever is situated
under the seat at the right rear of the
scooter (yellow lever
Fig. 7
). This
lever allows you to disengage the
drive mechanism and push the
scooter in ‘freewheel’ mode. To
disengage the drive, push the knob
forward to the ‘disengaged’ position
(
Fig. 8
). The scooter can now be
pushed.
Simply pull the lever back to re-
engage the drive mechanism (the
scooter can now be driven). The
scooter will not operate when the
lever is in the disengaged position.
The scooter must be turned off and
on by the key switch to reset the
circuits before it will resume normal
operation. The scooter will bleep
continually if the brake is disengaged
when it is switched on.
Caution! Never leave the scooter
unattended whilst in freewheel
mode as it will roll away down an
incline. ‘Freewheel’ mode should
only be used in an emergency to
move the scooter due to power
failure. NEVER move the scooter
in this mode whilst it is occupied.
Fig 8
Fig 7
Freewheel Lever
Starting to Drive
Getting Started
Note: You must fully charge the batteries prior to first use (see ‘Batteries
and Charging’)
Select an area with plenty of space.
Mount the scooter by either lifting the arm and sliding onto the seat or swivel
the seat around to access the scooter.
Ensure the seat is securely locked
in the forward facing position before driving.
Adjust the tiller and seat if
necessary (
see ‘Adjustments’
).
DO NOT use the tiller to fully support you
during transfers.
10
Summary of Contents for Cameo GK8
Page 19: ...Notes 19 ...