WIFI CONNECTION
Step 1:
Scan the QR code on the inside cover page
with your smart phone or download the APP
“Warmme” and install onto your phone.
Step 2:
Open Warmme, and register / log in following the on
screen instructions using your phone number, email or
third-party APP IE Facebook,..etc..
Step 4:
Hold both the up and down buttons on thermostat for 3 seconds,
F1 will appear. If F2 appears repeat the process, (hold up + down keys for 3
seconds) to switch between F1 & F2. Once F1 is showing on thermostat
screen with WIFI symbol flashing click “Next Step” on your phone screen.
Step 6:
Click “done” on phone screen after successful connection. You have now
completed the APP setup and can now use your phone to control this thermostat.
Note: If connection fails go back to step 4 and repeat
steps 4, 5 & 6 selecting F2, (Not F1) on
thermostat during step 4.
03
04
Note:
Steps 1-6 will setup one phone as the primary user. Each
thermostat can only have one primary user. If these steps are repeated using
a different phone on this thermostat then the original primary user will be
deleted and the new phone will become the new primary user.
Note:
To add more phones to a thermostat the primary user must
share this thermostats WIFI access with other smart phones through the
Warmme APP on therir phone by adding them in “Device Sharing”. Only the
primary user phone can add or remove other phones.
Note:
Only the primary user will have access to all the APP features.
Note:
Multiple thermostats can be linked to one phone and also
multiple phones can be linked to one thermostat.
Step 3:
Make sure the thermostat is on and your phone has the
Warmme APP live on the front screen, click “Add Device”. Note:
From this point onward the warmme APP has basic on screen
instructions you may also wish to follow.
Important:
Both this thermostat and your smart phone will require a strong WIFI signal to connect and operate correctly. Please make sure your phone WIFI is turned on.
Step 5:
Warmme APP will ask you to enter your WIFI network
password on your phone screen, once entered click next.
You Phone and thermostat should now be connecting. Note: This can
take a few minutes depending upon your WIFI signal strength.
Step 7:
You can now use your phone to switch
thermostats on / off, check or change temperature,
change mode, lock screen or adjust the menu settings.
Note: To set up the automated program cycle, this can
only be completed on thermostat.
Step 8:
To connect with additional thermostats simply repeat steps 3 - 6 for each
unit. Note: If your thermostat is already connected with a smart phone repeating
steps 3-6 will disconnect the old phone and install the new phone as the primary
user, (See Notes to left in RED text).
