Performing the measurement
The measuring device is calibrated on a potential-free measurement
of AC electric fields away from the body. i. e., the measuring device
should be located as far away from the body as possible when
measuring electric fields. For this, use the supplied mounting rods.
The mounting rods are screwed together. In one of the supplied
mounting rods, there is a small hole through which the screw fits on
the device. This is necessary so that the E-Field 1 is attached
securely to the rod.
By the directional characteristics of the measuring device, finding
and locating the field source is possible by rotating the probe.
©ROM-Elektronik GmbH
Page 11
