SERVICE MANUAL
EEPROM AT24C08
ernally organized as 1024/2048
4/128 pages×16 bytes
interface bus, I
2
C-Bus
le including
n all pins
ranges
3
. Refer to Table 14 about Functions and Service Data of the IC’s Pins.
2. Pin Configuration
1. Features
·Data EEPROM int
bytes and 6
·Page protection mode, flexible page-by-page
hardware write protection
-Additional protection EEPROM of 64/128 bits,
1 bit per data page
-Protection setting for each data page by
writing its protection bit
-Protection management without switching
WP pin
·Low power CMOS
·Vcc=2.7 to 5.5V operation
·Two wire serial
compatible
·Filtered inputs for noise suppression with
Schmitt trigger
·Clock frequency up to 400 kHz
·High programming flexibility
-Internal programming voltage
cyc
-Self timed programming
erase
-Byte-write and page-write programming,
between 1 and 16 bytes
-Typical programming time 6 ms (<10 ms) for up
·High reliability
6
1)
to 16 bytes
-Endurance 10 cycles
40 years
1)
-Data retention
-ESD protection 4000 V o
·8 pin DIP/DSO packages
·Available for extended temperature
+85
℃
-Industrial: -40
℃
to
-Automotive: -40
℃
to +125
℃
Page
Prot.Bit
EEPROM
Fig. 12
Fig. 11
. Block
Diagram
4
23
