rollibot RolliCute, User Manual, Page: 13 / 19

10
4.2 - Cleaning the Dustbin
The dustbin should be removed and cleaned after every 3-4 periods of substantial cleaning or as
needed. See the following images and instructions.
Step 1. After removing the dustbin,
push the edges of the lid up to lift it
off and remove it.
Step 2. Dump out the dustbin. If
needed, remove and tap the fi lter to
shake off any debris.
Step 3. Replace the dustbin lid and
press the edges to securely reattach it.
Step 4. Put the dustbin back inside
the RolliCute and replace the top
cover.
• The dust box and fi lter can be cleaned with water if needed. After rinsing, fully dry both
the dustbin and fi lter before placing them back in the RolliCute. If not fully dried, the
RolliCute’s internal parts may be damaged or the fi ltering may not work.
• Failure to regularly empty the dustbin will keep the RolliCute from working properly.
4.3 - Replacing the Filter
The RolliCute comes with one pre-installed fi lter. To purchase additional fi lters, please visit our
website at www.rollibot.com. Additional fi lters may be changed as needed. See the following
images and instructions.
Step 1. Remove the dustbin and
its lid to locate the fi lter, then
remove the fi lter.