12
RolliBot RolliCOOL 208-20 Portable AC User Manual
Step 9.
Cut the sponge according to the size of the window and stick it on the window frame.
Then install the assembled window kit into a gap between the window and the frame, then
frame. Push the window nearly closed to secure it. Turn the screw head to tighten or loosen the
screw fastener and adjust the sections as needed.
Using the sponge with the window kit is preferable, as it will create a better window seal; however, it may leave behind
residue that could be difficult to clean.
Step 10
. Align the outer connector with the window kit’s outlet, then affix the exhaust pipe onto
the window kit.
• Make sure the exhaust pipe is not bent or kinked as this may inhibit air flow and/or damage the unit.
• Make sure that the machine is placed in a flat position and the air outlet is not blocked
• Make sure the machine is placed at least 11.8 in. (30 cm) away from the wall.
Window Kit
Window Kit
Rubber Sponge
Rubber Sponge
Rubber Sponge
Rubber Sponge
11.8 in.
11.8 in.
11.8 in.
11.8 in.
