16
RolliBot RolliCool A20 Portable A/C with Heater User Manual
6.2 – How to Drain the Unit
In most cases, the A/C unit will not require draining. In the event that draining is necessary, the
unit will sound an alarm and the display’s “Full“ light will turn on to indicate the water reservoir
inside is full.
• Please make sure your A/C unit is completely powered off before
performing any type of maintenance.
• If relocating the unit before draining, move it carefully so as not
to spill the water inside the reservoir.
• Make sure the drainage pipe has adequate space underneath
for draining. If using the lower drainage opening, ensure there
is a suitable area for water runoff. If using the upper drainage
opening, fetch a container for water runoff before connecting the
pipe.
• Keep the drainage cover and the water plug on at all times when
not draining the unit.
• When draining the unit, do not allow the power cord to come in
contact with water.
• During drainage, the unit may be tilted slight backwards to
promote faster drainage.
• Keep in mind the unit may hold more water than expected. If using a container, do not use a small one or either take care of
drainage outdoors.
Using the Upper & Lower Drainage Openings
Remove the pre-installed caps and covers as needed.
Step by Step
The steps are the same for both the upper and lower drainage openings.
1. Turn off and unplug the unit then move it to a
suitable location for drainage.
2. Locate the opening and remove the pre-installed
plug (fig. 10).
3. Fit the drainage pipe over the connector.
If the drainage pipe is too stiff and/or cannot be attached, try soaking
the end in hot water to soften it first.
4. Allow the water to drain.
After draining is complete, it is recommended to turn the unit on and
run it in fan mode at the lowest speed for at least two hours in order to
ensure the drainage pipe dries inside.
5. Detach the drainage pipe.
6. Reinstall the plug back on to close the opening.
fig. 8
Plug
Pre-installed. This
piece keeps any water
from draining out
unexpectedly.
Drainage Pipe
Fits over the connector
and allows water to
drain out and from
the unit.
fig. 9
fig. 10