14
RolliBot RolliCool A20 Portable A/C with Heater User Manual
To Set a Shutoff Time
1. When the unit and remote are on, press the timer button on the control panel or remote.
2. Use the up and down buttons (-/+ on the remote) to select the time the A/C unit will turn off
off, e.g., selecting “03” will prompt the unit to turn off in 3 hours’ time etc.
3. After the selection is complete, the display will show the current indoor temperature and the
“Hr” light will turn on.
5.2 – Cool Mode
With this mode, the unit will turn on and regulate temperature as selected.
1. Press the power button on the control panel or remote.
2. Press the mode button on the control panel or remote multiple times until the display’s “Cool”
light turns on.
3. Use the up and down buttons (left/right on the remote) to set the desired temperature
61~88°F (16~31°C).
4. Use the fan button to cycle through fan speeds.
When cool mode is active, the unit will not turn on if the chosen temperature is higher than the indoor temperature.
5.3 – Dehumidify Mode
With this mode, the unit will turn on and begin removing moisture from the air.
1. Press the power button on the control panel or remote.
2. Press the mode button on the control panel or on remote multiple times until the display’s
“Dry” light turns on.
In dehumidify mode, the fan speed is automatically set to low and cannot be adjusted.
5.4 – Fan Mode
With this mode, the unit will turn on and begin use the fan to promote air circulation.
1. Press the power button on the control panel or remote.
2. Press the mode button on the control panel or remote multiple times until the “Fan” light
turns on.
3. Use the speed button to cycle through speeds (High, Medium, Low).
5.5 – Heat Mode
With this mode, the unit will turn on and begin outputting the air.
1. Press the power button on the control panel or remote.
2. Press the mode button on the control panel or on the remote multiple times until the display’s
“Heat” light turns on.
3. Use the up and down buttons (left/right on the remote) to set the desired temperature
61~88°F (16~31°C).
4. Use the fan button to cycle through speeds.
5.6 – Sleep Mode
With this mode, the unit will turn on and begin operating at a low speed. This mode is similar to
fan mode at low fan speed and functions as a way to aid sleep especially if you are used to light
noise around bedtime.
