12
7 CLEANING AND MAINTENANCE
a) Assembly and disassembly of the scales
Lift up the scales and pull to release the 2 pins.
To replace the scales, place them on the 2 pins, press slightly and let slide
down.
b) Assembly and removal of the bottom heating element
Pull on the bottom heating element to remove it from its connection box. This
has to be done when the oven is cold.
For the assembly, proceed in the reverse order. Take care, place the bottom
heating element in the right way
13
c) Cleaning
•
Disconnect the device.
•
Clean the external stainless steel walls with a wet sponge and soft and dry clothe
•
Remove the grid, the dript tray and the scales
•
Clean them in warm soapy water. The scales can be washed in a dishwasher
•
Remove the bottom heating element by pressing and pulling on the two connec-
tion branches (see pictures on pages 12 and 13)
•
The inside of your oven can now be easily cleaned with a wet sponge and warm
soapy water. Rinse and dry with a soft clothe all the wall of the oven
•
Do not use any abrasive product for the cleaning of your oven
•
Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
•
Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
.
8. TECHNICAL SPECIFICATIONS
Energy consumption
Convection position
Rising up to 230°C
0.50 kw/h
Maintenance 1 h at 230°C
0.70 kw/h
Turbo Quartz position
Rising up to 230°C
0.40 kw/h
Maintenance 1 h at 230°C
0.60 kw/h
The equipotential connection marked by this symbol must be linked with the
equipotential conductive connection of your installation.
9. NORMS AND LEGALS DISPOSALSNORMES ET DISPOSITIONS LEGALES
The device is conform to
:
EN 60335
-
1 ; EN 60335
-
2
-
36.
Model
FC 380 TQ
Outside dimensions
555x550x355 mm
Inside dimensions
410x360x250 mm
Weight
22 Kgs
Power
2
400 W
Current
13 A
Voltage
220
-
240 V ~