EN-19
CAPTURE MODE
Capturing Images
Your camera is equipped with a 3.0" full color LTPS-TFT LCD monitor to help you
compose images, playback recorded images/video clips or adjust menu settings.
1. Press the
POWER
button to turn the power on.
The status LED lights green and the camera is initiated.
When the power is turned on, the camera will start in the mode that was last set.
If the power is turned on in [
] or [ ] mode, the lens will extend forward and it is
ready for shooting. In both modes, if the mode switch is set to [
], the lens barrel
will retract into the camera body after 30 seconds.
If the power is turned on in [
] mode, the lens will remain closed.
2. Slide the mode switch to [ ].
3. Compose your image in the LCD monitor.
Pressing the button zooms in on the subject, and enlarges the subject on the LCD
monitor.
Pressing the button provides a wider angle image.
4. Press the shutter button.
Pressing the shutter button down halfway
automatically focuses and adjusts the exposure,
and pressing the shutter button down fully
captures the images.
The focus area frame turns blue when the
camera is in focus and the exposure is
calculated.
When the focus or exposure is not suitable,
the frame of the focus area turns yellow.
If the photographic preview is set to [2 sec.] /
[4 sec.], the captured image will be displayed
while the image is being recorded onto the
SD/SDHC memory card.
2
Press down fully
1
Press down halfway
