EN-30
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Slide the mode switch to [ ].
2. Select the image that you want to protect with the
e
/
f
buttons.
3. Press the
MENU
button.
4. Select [Protect] with the
c
/
d
buttons, and press
the
SET
button.
5. Select [Single] or [All] with the
c
/
d
buttons, and
press the
SET
button.
6. Select [Set] with the
c
/
d
buttons, and press the
SET
button.
Protection is applied to the image and the
camera returns to the playback mode.
The protect icon
[ ]
is displayed with protected
images.
When [All] has been selected,
[ ]
is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
1. Select [Protect] with the
c
/
d
buttons from the
playback menu, and press the
SET
button.
2. Select [Single] or [All] with the
c
/
d
buttons, and
press the
SET
button.
3. Select [Cancel Protect] with the
c
/
d
buttons, and press the
SET
button.
The removal of image protection is executed and the camera returns to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the
c
/
d
buttons from the playback menu, and press the
SET
button.
2. Select [Select] with the
c
/
d
buttons, and press the
SET
button.
The images are displayed in the thumbnail display.
3. Select the image you want to protect with the
e
/
f
/
c
/
d
buttons, and press the
button.
The protect icon
[ ]
is displayed with protected images. Selecting a protected image
and
pressing the button again will cancel the protection. This procedure is
repeated to select
multiple images.
4. Press the
SET
button.
Protection and cancellation of the protectionare are executed and the camera returns
to playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless
of their protected status.
