37
Safety Instructions
– If the scanner or its accessories are damaged, they must be replaced or repaired by the manufacturer, its
service department or a similarly qualified person in order to avoid hazards.
– The housing must not be opened and repairs must only be carried out by a specialist. Contact a specialist
workshop for this purpose. All liability and warranty claims are excluded in the event of repairs by the
user, improper connection or incorrect operation.
– Do not immerse the scanner or cable in water or other liquids.
– Never touch the scanner with wet hands.
– Do not place objects with open flames, such as candles, or objects filled with liquid, such as a vase, on the
product.
– Keep scanner and cable away from open flames and hot surfaces.
– Route the power cord so that it does not present a trip hazard.
– Do not bend the power cord or lay it over sharp edges.
– Never store the scanner in a place where it could fall into a tub or sink.
– Never touch an electrical appliance that has fallen into water.
– Do not expose the built-in battery to strong heat such as sunlight, fire, etc. Risk of fire and explosion.
– If you do not use the Gimbal for a longer period of time or if a device malfunction occurs, be sure to
switch off the device.
CAUTION!
Danger to children and persons with limited physical, sensory or mental abilities (e.g.
partially disabled, elderly persons with limited physical and mental abilities) or lack of experience
and know-how (e.g. elderly children).
– This scanner may be used by persons with limited physical, sensory or mental abilities or lack of experience
and know-how, provided that they are supervised or have received instructions for the safe use of the
scanner and understand the potential hazards arising from its use. Children must not play with the scanner.
The scanner must not be cleaned or cared for by children. Keep children under the age of eight away from
the scanner.
– Do not insert any objects into the scanner.
– Do not leave the scanner unattended during operation.
– Do not place the scanner on the edge or edge of a work surface.
