26
ENGLISH
4. Inserting Slides / Negatives
Slider
1 . Place the slides in the recess [4] .
– Make sure that the slides are inserted upside
down .
– If your slides are less than 1 .9 mm thick, set
the switch to the 1 .1-1 .8 position [1] .
– If your slides are thicker than 1 .9 mm, set the
switch to the 1 .9-3 .0 position [2] .
Note:
If you do not know the thickness of your
slides, leave this switch alone . However, if your
slides get stuck in the slide feeder, remove
the slide feeder, set the switch to the opposite
position and try again .
2 . Insert the slide slider [3] into the device from the
right .
3 . Press the slider from right to left to insert the
slides one by one into the device .
2x2
1
2
4
3
