23
3.4 Parking Mode
To monitor the vehicle when it is parked, you can activate
Vibration
Detection,
or
Motion and Collision Detection
.
Follow the steps below to change the settings for Parking Mode:
1.
Press the
button to enter the OSD
menu.
2.
Press the
/
button to select
Parking Mode
, and then press the
OK
button for entering function
menu.
3.
Press the
/
button to configure
Parking Mode (Vibration Detection /
Motion and Collision Detection / Off),
and then press the
button to
complete setting.
•
Vibration Detection:
-
If disconnected external power supply when the
camcorder is powered on, the system alert message
“
Wait 10 seconds to enter Vibration Detection.
” This
means the system will power off and enter Vibration
Detection automatically in 10 seconds.
-
Once Vibration Detection Mode is triggered, when the
camcorder detects any collision, it will automatically
power on and start recording, the event will be recorded
for 60 seconds (per file).
-
In this mode, drive recorder is powered off until event
happens. This mode is more power saving.
•
Motion and Collision Detection:
-
If disconnected external power supply when the
camcorder is powered on, the screen will show
message “
Enter parking mode after 10 sec.
” This
means the unit will enter Motion and Collision Detection
automatically in 10 seconds, and then LCD screen turn
