21
3.1.3 Emergency Recording
To Start the Emergency Recording, do the following:
1.
During Video Recording, press the
button to enter emergency recording
mode, the “
Emergency
” message will
be shown immediately on the upper
right corner of the screen, and the
recorded file will be protected.
2.
The emergency video recording length is same as the
recording interval setting. When the emergency recording
length reaches the setting, the system will return to the general
recording mode.
Note:
1. If the
Collision Detection
function is enabled and a collision is detected, the
camcorder will automatically trigger the emergency recording.
2. The emergency recording file is created as a new file, which will be protected
to avoid being overwritten by normal loop recording. A memory card can save
up to 20 emergency video files if record interval time is 1 minute, and save up
to 10 emergency video files if record interval time is set as 3 minutes.
3. The notice message of “
Emergency files are full
” will pop up on the screen
when the emergency recording folder is full, and the later emergency files will
be saved in the
Normal Video
folder which will be over written if memory is
full. Thus, if you want to keep newest emergency video file, please manually
delete the oldest files in the emergency video folder to release more capacity.
