manualshive.com logo in svg

Rollei AFM 35, Operating Instructions Manual, Page: 38 / 52

Share
Download
Rollei AFM 35 Operating Instructions Manual Download Page 38

38

Camera care

Your camera is a precision instrument and merits
proper care.

1. Cleaning the camera body

›

Be sure never to use organic solvents, such as
thinner or alcohol, for cleaning.

›

Use a soft, fluffless cloth to clean the camera body.

›

Dust deposits in the film compartment may cause
scratches. This is why you should also clean the
interior of the camera with a blower brush.

2. Cleaning glass surfaces

›

Scratches on the front lens will degrade the
sharpness of your pictures. If your pictures appear
to have low contrast and seem be slightly blurred,
scratches on the lens may be the culprits. Clean the
front lens regularly as follows:

›

Clean dust using a blower brush.

›

To remove obstinate marks, apply a few drops of a
lens-cleaning fluid to lens tissue and carefully wipe
the lens outwards in concentric circles.

›

After humid cleaning, wipe the lens outwards in
concentric circles with dry lens tissue.

›

NEVER try to clean a dirty front lens by breathing on
it and wiping with a silicone cloth. This would
inevitably scratch the surface.

›

Clean the AF and viewfinder windows as described
above for the front lens. Scratches on the AF
windows may affect focusing accuracy. Dust and
smudges on the viewfinder window will reduce the
clarity of your viewfinder image.

3. The LCD panel

›

The LCD panel will darken at temperatures above
approx. 60

°

C, but return to its normal condition at

room temperature.

›

At low temperatures, LCD panels tend to respond
more slowly. However, this is normal.

 CAMERA CARE AND STORAGE

Summary of Contents for AFM 35





















































Reviews:

No comments