manualshive.com logo in svg

Rollei AFM 35, Operating Instructions Manual, Page: 18 / 52

Share
Download
Rollei AFM 35 Operating Instructions Manual Download Page 18

18

 WHEN AUTOFOCUS MIGHT FAIL/RELEASING THE SHUTTER

Releasing the shutter

›

Press the shutter release halfway.

›

The camera will focus automatically, and the green
focus indicator will light.

›

The red warning LED should NOT be lit.

›

Softly press the shutter release all the way.

›

In low light, the flash will fire automatically.

›

After each exposure, the frame counter will advance
by one step.

When autofocus might fail

The autofocus system has its natural limits, and in
some cases it may be advisable to use focus lock (see
p. 19). Alternatively, you may focus manually (see p.
35). Difficult subjects for autofocus are, among others,
the following:

›

A bright light source, for instance the sun or a strong
reflection from a water surface, car paint, etc. near
your main subject.

›

A mirror or another highly glossy surface near the
center of your picture.

›

A background that is noticeably brighter than your
main subject.

›

Exclusively vertical patterns within the AF area.

›

Fast subject motion.

Summary of Contents for AFM 35





















































Reviews:

No comments