manualshive.com logo in svg

Rollei AFM 35, Operating Instructions Manual, Page: 33 / 52

Share
Download
Rollei AFM 35 Operating Instructions Manual Download Page 33

33

EXPOSURE BRACKETING

›

To activate the AEB mode, press button (8).

›

The mode and the compensation selected will appear
on the LCD panel.

›

The flash will be disabled automatically because it is
incompatible with this mode.

›

Press the shutter release halfway. AEB will light up
in the viewfinder to confirm your setting.

›

If the resulting exposure is unrealistic, the red warning
LED will light, AEB and the compensation value will
blink on the LCD panel, and the shutter cannot be
released.

›

If this happens in programmed AE, reduce the
compensation set; in aperture-priority AE select
another f-stop.

›

If you then hold down the shutter release, the three
successive shots will be taken automatically.

›

The AEB mode is not canceled automatically.

›

To disable the mode, press button (8).

›

You may keep bracketing until less than three
frames are left on your film.

Separately triggered bracketing exposures

›

You may also trigger each of the three exposures
separately.

›

The focus setting of the first shot will be retained for
the remaining two. After the series, focus and
exposure settings will be canceled.

Note:

Switching directly from backlight compensation to
AEB is not possible. In this case, first select another
flash mode by pressing button (7), then press button
(8).

Summary of Contents for AFM 35





















































Reviews:

No comments