Page 3.1
RB12 Aero - DUAL Installation Manual | February 2017
© Copyright 2017 | Rollease Acmeda Group
SECTION 3
– INSTALLATION SCENARIOS
PART A
– MULTIPLE SHADES INSTALLED SIDE-BY-SIDE
ALIGNING
SHADE
S
i) Install ‘1
st
Shade’ as per Section 2 of this manual.
Leave ‘1
st
Shade’ down (Front & Back).
(NOTE: ‘1
st
Shade’ is determined by 'Control Side'; the 'Control Side' is adjacent to the next shade.)
ii) Install 'Central Shade(s)' as per Section 2, Parts B, C & D of this manual.
TIP: Ensure each shade has the same number of pre-tensions as the ‘1
st
Shade’.
Ensure each shade is aligned correctly with the ‘1
st
Shade’; refer to Section 2, Part D, Step 3 for correcting slight misalignment.
Set Top & Bottom Limits as per Section 2, Part E of this manual to match ‘1
st
Shade’.
iii) Install ‘Last Shade’ as per Section 2, Parts B, C & D of this manual.
TIP: Ensure each shade has the same number of pre-tensions as the ‘1
st
Shade’.
Ensure each shade is aligned correctly with the ‘1
st
Shade’; refer to Section 2, Part D, Step 3 for correcting slight misalignment.
NOTE: If the shade pre-tension is to be adjusted and there is insufficient space to rotate Socket Ratchet within installation, Shade &
Box to be removed from Mounting Clips to undertake process. TIP: Measure the amount of misalignment in shades prior to
removing shade.
Set Top & Bottom Limits as per Section 2, Part E of this manual to match ‘1
st
Shade’.
PART B
– FRONT ROLL INSTALLATION
REVERSE INSTALLATION
SIDES OF CASSETTE BACK & COVER
BACK ROLL (STANDARD INSTALL)
FRONT ROLL (REVERSE INSTALL)
NOTE: This Front Roll configuration option has limited functionality when installing; the Cassette Back now functions as the ‘Cover’.
The Cassette Back can only be removed when the Screws from the End Caps are removed from each end.
LAST SHADE
CENTRAL SHADE
1st SHADE
