© 2015 Rollease Acmeda
© 2015 Rollease Acmeda
4. TROUBLESHOOTING
Page. 11 of 12
How to delete all transmitters & limits. P2 + STOP + P2.
1
=
Jog x1
+
P2
P2
+
PROBLEM
CAUSE
REMEDY
Shade moves in opposite
direction
Pairing sequence error.
refer to section 3.4 to reverse blind direction.
When power is switched on,
the motor refuses to work or
moves slowly
1.
Voltage too low
2.
Errors in line connection
3.
Overload
4.
Installation error.
5.
Transmitter batteries
are Flat
1.
Check voltage is within the rating specified.
2.
Check the wiring.
3.
Verify motor capacity (torque) has not been
exceeded.
4.
Check for excessive friction in assembly. Ensure
tube deductions are correct and that there is
suitable clearance between motor head & bracket.
5.
Replace batteries in transmitter.
Motor suddenly cuts off.
Rated operating time (4min)
exceeded
Wait approximately 20 minutes for motor to cool down.
