14
USING
YOUR WATCH
ROLEX
SERVICE
THE HEART OF THE
YACHT-MASTER II MODEL
USING THE OYSTER PERPETUAL
YACHT-MASTER II
1. Programming the countdown
(before a race):
to programme the countdown, follow
the steps in the order given:
– Ensure that the countdown seconds
hand is stopped. If not, stop it by
pressing the upper pusher.
– Put the bezel in
position II
by turning
it counterclockwise as far as it will go.
This blocks the upper pusher.
– Press the lower pusher until it
remains depressed. The countdown
seconds hand returns to 12 o’clock.
The countdown minutes hand comes
back to the same minute programmed
at the last setting.
– Unscrew the crown.
– Set the countdown duration by turning
the crown clockwise. The countdown
minute hand jumps from minute to
minute. Stop at the desired countdown
duration (10 minutes in this case).
– Put the bezel in
position I
by turning
it clockwise as far as it will go. This
unlocks the upper pusher and releases
the lower pusher.
– Push in and then screw down the
crown. The countdown is now
programmed.
Go to step 2
