10
USING
YOUR WATCH
ROLEX
SERVICE
THE HEART OF THE
YACHT-MASTER II MODEL
SETTING THE
OYSTER PERPETUAL YACHT-MASTER II
Screwed-down position (position 0):
the crown is completely screwed down
against the case. When the crown
is in this position, the Oyster Perpetual
Yacht-Master II is guaranteed waterproof
to a depth of 100 metres (330 feet).
Manual winding (position 1):
the crown is unscrewed. To wind
the watch manually, turn the crown
clockwise; turning in the other direction
has no effect. When setting the watch
for the first time or after the watch
has stopped, complete a minimum
of 25 turns for partial winding.
Setting the time (position 2):
the crown is unscrewed and pulled out
to the first notch. The small seconds
hand is stopped, allowing you to set the
time to the precise second. To set the
hour and minute, turn the crown in
either direction.
Before setting the watch, make sure the
bezel is in
position I
.