Roland ZSC-1, User Manual

Page: 18 / 32

16
2-1 Operation As a 3D Scanner
Operation As a 3D Scanner
Startup
➊
Close the front cover.
➋
Switch on the main power switch.
The POWER light comes on.
➌
Press the Sub power button.
The machine starts up, and initialization is per-
formed.
To Start Scanning
➢
Confirm that the SCANNING light comes on.
➢
Confirm that the VIEW lamp goes dark.
➢
During scanning, never open the front cover.
➢
You can pause scanning by pressing the VIEW button.
[MDX-40A]
Pressing and holding the VIEW button resumes operation.
[MDX-40, TS-30]
Pressing the VIEW button a second time resumes operation.
➢
You can open the front cover while operation is paused.
Operation During the Scanning Mode
➢
The SCANNING light comes on when the machine is in the scanning mode.
➢
The machine automatically changes to the scanning mode when the sensor unit is installed and to the
modeling mode when the spindle unit is installed.
➢
The operation of other buttons and controls is identical both in the scanning mode and in the modeling
mode. Refer to the documentation included with the modeling machine.
➢
When in the scanning mode, the "operation-panel screen(VPanel)" cannot be used.