1
ZBX-540E Safety Cover
Assembly Instructions
This document provides instructions for service personnel. These procedures should not be
performed by the end user.
————————— Important Notes on Assembly Operations —————————
WARNING
Before attempting these operations, unplug the power cord for the modeling ma-
chine. Failure to do so may result in danger of electrical shock, electrocution, or en-
tanglement.
WARNING
After completing the operations, be sure to verify the operation of the interlock switch,
and never use the machine if the switch does not operate correctly.
➢
Before attempting these operations, read through this manual and familiarize yourself with the installation loca-
tion and orientation of each part.
➢
Assembly operations are to be performed by two or more persons.
➢
To prevent injury, wear gloves when performing these operations.
➢
Be sure to use some means to secure the emplacement base and safety cover.
Supported model
MODELA Pro II MDX-540
External dimensions
W x D x H: 1,042 x 1,030 x 978 mm (41 x 40.6 x 38.5 in.)
Weight
68 kg (150 lb.)
