background image

16

Re-installing your plug-ins

If you initialize (format) the hard disk of your VS series unit, the VS plug-in programs on 
the hard disk will be lost, leaving you unable to use the VS plug-in programs even if the 
VS8F-3 is installed. By re-installing the VS plug-in programs you will again be able to use 
them.

1.

Perform Steps 1~5 of 

Installation procedure

 (p. 15).

The “Re-Install?” popup will appear.

2.

To begin the re-installation process, press [ENTER/YES].
The “Really, Sure?” popup will appear.

3.

To confirm the re-installation process, press [ENTER/YES].
If you press [ENTER/YES], VS plug-in programs will be installed to the hard disk.

4.

When installation is completed, remove the CD.
The CD-RW menu screen will appear.

Uninstalling a plug-in

Here's how to delete an installed VS plug-in program. This lets you delete a trial version 
of a VS plug-in program, or obtain more free space on your hard disk if it becomes full.

1.

Press [CD-RW].
The CD-RW menu screen will appear.

2.

Select Page 2 “PLUG-IN UnIns,” and press [ENTER/YES].
The PLUG-IN UNINSTALL screen will appear. This lists the VS plug-in programs that are 
installed on the hard disk.

3.

Use the cursor to select the plug-in that you want to delete, and press [F5 (UNINST)].
The “Uninstall?” popup will appear.

4.

To start the uninstall process, press [ENTER/YES].
The “Really, Sure?” popup will appear.

5.

To confirm the uninstallation process, press [ENTER/YES].
If you press [ENTER/YES], the selected VS plug-in program(s) will be deleted.

If you uninstall an 
authorized version of a VS 
plug-in program, the user 
patches will also be 
deleted. The deleted data 
cannot be recovered.

Summary of Contents for VS8F-3





































Reviews: