Menu List (Setup Screen)
5
Category
Setting item
Value
Explanation
SYSTEM
AUTO SCAN
OFF
, ON
This sets the Auto Scan function on or off. When set to “ON,” channels 1 through 4 are
switched automatically.
AUTO SCAN TIME
1–
5
–120 sec
When the Auto Scan function is on, this sets the video display interval.
LCD BRIGHTNESS
LOW,
HIGH
This sets the brightness of the built-in monitor.
MENU DISPLAY LEVEL
5–
13
–15
This adjusts the brightness of the menu display.
LEVEL METER DISPLAY
OFF,
ON
Setting this to “ON” displays a volume level meter on the built-in monitor.
INPUT CH LEVEL DISPLAY
OFF,
ON
Setting this to “ON” displays labels identifying the input signals on the built-in monitor.
TALLY LABEL DISPLAY
OFF,
ON
Setting this to “ON” displays a tally border on the built-in monitor and in preview output.
NO SIGNAL BACK
BLACK
, BLUE
This sets the background color of channels that have no video input.
UNFIT SIGNAL BACK
BLACK
, BLUE, THRU
This sets the background color of channels on which video of an incompatible format is
input.
When set to “THRU,” video in an unsupported format is output unchanged, allowing
confirmation of the status of the input signal. Note, however, that the video might contain
additional noise artifacts.
DEINTERLACE MODE
WEAVE,
BOB
This specifies the method used when converting interlaced input video to progressive
video.
WEAVE: This joins the top field and bottom field in a single frame. This is optimal for video
that contains little movement.
BOB:
This interpolates the top field and bottom field, and unites them in a single frame.
This is optimal for video that contains much movement.
COLOR BAR OUTPUT
OFF
, ON
Setting this to “ON,” a color bar is output.
TEST TONE OUTPUT
OFF
, ON
Setting this to “ON” outputs a test tone.
AUTO OFF
OFF,
ON
This sets the Auto Off function on or off. When set to “ON,” the power to the VR-4HD is
automatically turned off if 240 minutes elapse with no operation performed on the unit.
PANEL LOCK
OFF
, ON
This sets whether panel lock is enabled (ON) or disabled (OFF) for all controllers except the
[SYSTEM SETUP] button and the [VALUE] knob.
MONITOR BUTTON LOCK
OFF
, ON
This sets whether panel lock is enabled (ON) or disabled (OFF) for the [INPUT] and [OUTPUT]
buttons.
TOUCH PANEL LOCK
OFF
, ON
This sets whether panel lock is enabled (ON) or disabled (OFF) for tap operations on the
built-in monitor.
FREEZE MODE
ALL
, SELECT
This sets the operation mode for freezes.
TOUCH PANEL CALIBRATION
([EXEC])
This calibrates the tap points for the touch panel (the built-in monitor).
FACTORY RESET
([EXEC])
This returns the unit to its factory defaults.
VERSION
—
This displays the version of the system program.
