background image

3

About Remote Control Modes

You can remotely control the VR-3 from an external MIDI device such as a keyboard. You can also send operational status updates 
from the VR-3 to another MIDI device. 

There are three remote control modes.

Standard Mode

This is the exclusive MIDI remote control mode of the VR-3. You can remotely control the following operations of the VR-3 with an 
external MIDI device.

• Audio level

• Transition select

• On/Off of key composition

• Setup of transition or key parameters

• Output fade

• Channel selection

MIDI Visual Control (MVC) Mode

MIDI Visual Control (MVC) is a new world-wide standard of MIDI. It aims to link music and video during live performances. By 
connecting the two devices via MDI, you can remotely control the VR-3 with an electronic musical instrument in time to the music 
or audio.  The VR-3 switches to MVC mode when it receives an MVC "On" command from a MIDI device. .

* When the VR-3 receives MVC OFF message, the remote control mode automatically returns to standard mode.

V-LINK Mode

V-LINK is a Roland original feature to link music and visual performances. You can remotely control the VR-3 via a MIDI connection 
from another V-LINK enabled Roland product. 

The VR-3 can turn on its V-LINK mode when it receives a V-LINK "on" command from another Roland V-LINK enabled product. 

* When the VR-3 receives the V-LINK OFF message, the remote control mode automatically returns to standard mode.

Summary of Contents for VR-3


























Reviews: