3. Assembling and Installing
16
2.
Secure the assembled take-up unit in place on the printer stand.
Check to make sure the screws on the printer stand are not loose.
Retighten if loose.
Place the take-up unit on the stand.
Determine where to secure the take-up unit in place.
Secure mounting fixture A in place using bolts with washers.
The mounting location varies according to the printer.
Make sure the take-up unit is completely flush with the stand.
Place so that the control box and frame are pressed against the stand leg and mounting fixture A is pressed against
the caster.
TrueVIS series (VG-640,VG-540)
Attaching method of the VG-640, VG-540, refer to exhibit manual "Change notice for the user's manual contents".
PRO II/PRO II V series, SP-540V
Place
pressed
against.
Stand
leg
Place
pressed
against.
Caster
Mounting fixture A
Place
pressed
against.
Frame
Stand leg
Control box
Slot
Top
Bottom
Mounting fixture A
The left and right sides
have no handedness.
Control box
Front side of the printer
Bolts with
washers
Hex wrench (small)
Mounting
fixture A
