14
3. Assembling and Installing
Read This First
Before attempting the operations described here, first install the printer you're using at the target loca
-
tion.
Carry out the operations in a location that is flat, level, and stable.
We recommend carrying out the operations at a location near to where the printer you're using is
installed.
Assembling and Installing
CAUTION
Unpacking and installation must be carried out by two or more persons.
Otherwise the machine or the stand may fall, resulting in injury.
1.
Assemble the take-up unit.
Attach the frame and control box to the support bar.
Attach the arm to the rail slider and secure in place with the arm retaining screw.
Orient this side toward the rear.
Arm
Rail slider
Arm retaining screw
Control box
Hex wrench
(large)
Large bolt
Wide
Support bar
Large bolts
4 pcs.
Frame
4 pcs.
Narrow
