Roland Texart RT-640, Setup Manual

Page: 40 / 44

6. Network Settings
38
Step 2: Make the Network Settings on the Machine
1.
Set the IP address.
2.
Set the subnet mask.


Press to go back to the original screen.
If you use the computer and the machine one-on-one basis, this will complete the settings to make on the ma-
chine. Go on to Step 3. If you need to set the gateway address, then go on to the procedure following this one.
：Select address number
：Move to the next address
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
NETWORK
IP ADDRESS
IP ADDRESS
000.000.000.000
IP ADDRESS
192.168.000.XXX
：Select address number
：Move to the next address
NETWORK
IP ADDRESS
NETWORK
SUBNET MASK
SUBNET MASK
000.000.000.000
SUBNET MASK
255.255.255.000
[IP ADDRESS]:
192.168.000.XXX
Here, "XXX" can be any number
between 1 and 254. For the part
corresponding to "192.168.000,"
apply the same value as the set-
ting of your computer.
Make the setting the same
value as the one used by the
computer at step 1.