Roland Texart RT-640, Setup Manual

Page: 25 / 44

5. Filling with Ink
23
w
First insert the dotted tube through the square bush.
Install the tubes from below in order.

Take care to ensure that the tube does not break.

If a tube breaks, do not use it. Use a spare supplied by the service technician.
Ensure that the dotted
end of the tube is at the
top. Install tubes with
more dots towards the
outside and tubes with
fewer dots towards the
inside.

Always use gloves (anti-slip).

Hold the tube around 10 mm from the end and insert it straight
in so that it does not break.